FKX40 phasecoupler

[Jeffke]

Hi all

I just installed the FKX40 and since then it is almost impossible to dim/brighten the lamp modules. It seems that each command it receives is sent at least 4 times across the same phase resulting in an uncontrollable dim or brighten action. I know it is a repeater as well but this could (to my opinion) not be the normal behaviour. Unfortunatly I don't own a PMIX35 (yet) to reprogramm it (switch of the repeater functionality)
Does anyone have the same experience? or a solution to this

Cheers

Jeff

[bier1234]

I have the same
someone has a solution
Dutch like to my email (dekeet333@hotmail.com)

[Bwired]

I have the same device running for years nows without any problems in a 3 fase network.
Check your network or the software thats translating the received x10 commands.

[bier1234]

I can not program
may be related to a 3 phase motor?
I want the repeat function off

[Post-IT]

You will have to program using the buttons on the FKX. Programming through PMIX35 is not possible. See the manual for the procedure... The manual is also easily found on Google.