Sorry for the late answer. Let me explain. I just openenend my duwi shutter module to make a pictures of the way I connected it.
This is how I did this:
I openened up the remote. The I found out that every button has it own live wire and there is one neutral wire in the remote. The buttons shortcuts the correspondenting live wire with the neutral wire. This made it easy to use in a shutter module. lengtened the wire from the motor to be able to build the shuttermodule in my wall.
I fixed the module like this:
N = Blue wire = neutral 220 volts
L = Brown wire = Line/live wire 220v
~1 = the live wire (5 or 12 volts, cannot remember) from the remote that correspondents with the opening button
~2 = the live wire from the remote that correspondents with the closing button
com = the neutral from the remote(important, dont use the 220v neutral)
A little more explanation:
The N & L are for feeding the module with power and are in no way connected with the ~1, ~ 2 and com. These are seperated.
Because the buttons give a ' pulse' when you press them, you have to reprogramm the duwi.me module to shorten the time the relay makes contact. You can find an instruction here:
http://www.ihomeautomate.eu/2011/10/?lang=nlThis way I can fully open and close my curtains in Homeseer, with the button or just pulling on them. I use the last option the most
