[Poll for interest] OpenTherm Gateway pcbs

[Lennart]

[Poll for interest] a limited number of OpenTherm Gateway printed circuit boards.

UPDATE: the original boards are all gone, but if there's enough interest, I'll be willing to have another batch made. See my posting below.
UPDATE 2: we've made it for the second batch. Topic closed for now, unless another 10 people jump in .
UPDATE 3: we've made it for the third batch. As there still seems to be additional interest, I'll start a fourth batch.

The board is discussed in this topic:

domoticaforum.eu/viewtopic.php?f=70& ... =60#p58086

The board itself is described at:

http://www.tclcode.com/opentherm/index.html#gateway

I wanted one myself and had to order 10 at the same time. These pcbs are blue with ENIG finish (= golden pads for good solderability):





Price: EUR 6,50 each + EUR 1,- shipping within NL.

Contact me by PM or reply to this post if you're interested.

The parts to complete the build can be ordered directly from Conrad:

tclcode.com/opentherm/schematic.html#pa ... l#partlist

[pendul]

Hi Lennart,

I would be very much interested, so if anyone isn`t buy one of the boards, you can count me in.

Greetz,

Pendul

[gvdham]

me too

[Viper1970]

i'm interested a well

[Lennart]

Ok, if there's enough interest, I'll be willing to order another batch of 10 boards. These will again be blue but with normal HASL finish (tinned pads).

Price will be EUR 6,50 again (+ EUR 1,- for shipping within NL). I'll place the order if we reach 7 members who pledge to pay for a board. Once we reach 7, it'll take about 4 weeks to get the boards.

So far, I have:

1 - Sanka
2 - Pendul
3 - gvdham
4 - Viper1970
5 - Herbus
6 - Willem4ever
7 - gjniewenhuijse
8 - Antoon
9 - Templar
10 - [Reserve board, in case of any problems]

Please send me a PM if you are certain that you want a board. And, also, please send me a PM if you're currently on the list and not interested anymore.

UPDATE: It looks we've made it! I'll order the boards.

Lennart

[pendul]

I can not send you a pm (not enough messages for the moment), but I am still interested.

[gjniewenhuijse]

Is it also possible to order a complete board (ready to use)? with components and programmed pic?

[Lennart]

@gjniewenhuijse: you have a PM.

[Antoon]

+1

[pendul]

Lennart, thanks for ordering, can't wait until it is delivered, until then, I guess I have to work on my old and probably rusty soldering techniques

[Jeffrey]

@Lennart: My pcb arrived in mint condition. Thanks for the quick service!

[Mark59]

Hallo Lennart, ik zou ook graag een Gateway PCB willen bestellen, ben echter nieuw op dit forum en weet nog niet goed de weg .
Ik kan kennelijk ook nog niet PM'n . hoor graag van je Groet Mark

[jeroenc]

Hoi Lennart, kan ik er nog een bestellen? Groeten, Jeroen

[Lennart]

Ok, let's see if we can find enough people for a third batch...

UPDATE: Ok, we've made it. Batch is fully reserved, boards have been ordered. I''ve contacted all of you for payment and shipping info.

Same conditions as before: blue pcb, HASL finish. Price will be EUR 6,50 again (+ EUR 1,- for shipping within NL). I'll place the order if we reach 7 members who pledge to pay for a board. Once we reach 7, it'll take about 4 weeks to get the boards.

So far, I have:

1 - Mark59
2 - jeroenc
3 - daferra
4 - Zefram
5 - Edwin
6 - HanvA
7 - geert-jan
8 - Bastiaan
9 - spierie
10 - [Reserve board in case of any problems]

Please send me a PM or reply here if you are not on the list yet and certain that you want a board. And, also, please let me know if you're currently on the list and not interested anymore.

Lennart

[raymonvdm]

I think of building a Gateway to and would like to order the board if i know for shure it wil work with my boiler.


So please place me on the list for know