AMST 606 Rfxcom status request open of closed

[vunnie]

Hi

I'm fairly new to the whole home automation happen so my apologies if I don't understand you guys at once.

My question is as follows. I want a KaKu AMST-606 window sensor with RFXcom, HomeSeer to perform a event.
At the moment that the KaKu switch is open it gives a dim value of 13%. At the moment that the switch is closed, the value 0.

Now if I create an event where I say "Device value change" equal to 0 then torn on a light. This works fine! But .... as
I say "device value change" equal to 13 nothing happens.
I feel that, for some reason, the values read by home seer do not correspond.
I have already tried to set a "range" but also no result. Also if I change the setting to "any" value change it does work fine so Homeseer sees the change of the switch

I read about AMST-606 but I do not understand scripts etc so I ask some help through this new topic

I would prefer the status in Homeseer to port open or closed. In HS touch I did manage this but in the status of homeseer I only get a value of 0 for closed and 13% for a opened switch.

Someone an Idea

[Irritanterik]

How did you configured the sensor in HomeSeer? Manual or with the RFXCOM-plugin > Input Devices > Add option?

[vunnie]

How did you configured the sensor in HomeSeer? Manual or with the RFXCOM-plugin > Input Devices > Add option?

Hi,

I added it via the RFXcom configuration page. I Added an input device: " Garagepoort sensor \3 Garage BGG AC Input Device AC[1C105F89]a 0 1 No 200 0 "

Then I went to the status page. There I see the device switching "Closed = off" and "dim 13% = open" If I just could set the value to eighter op or closed it would be ok. In other devices I can change this in the device properties and click on "edit value status" But RFXcom devices do not have this option.

I really have no clue how to change this

[Irritanterik]

Have you tried the 'Use On/Off status for AC remotes.' option on the RFXCOM-plugin > Input Devices page?

[vunnie]

Have you tried the 'Use On/Off status for AC remotes.' option on the RFXCOM-plugin > Input Devices page?

Yes I tried that!

[mrtiger]

I have the same problem with my nexa 606 door sensor.
The problem is that it gives you a dim, 54% command when its open and not on.(13% in your case)
I did talk to other people that have the same senor but older verson and they get on and off command out from the device.
I think they have changed the code on the senor, but nexa say they havent change the code for det unit.
I was thinking that it was something wrong with my device, so i did buy a new one but i got the same dim,67% out command.
Did try to make it work with homeseer without any luck:(

[mrtiger]

I also read that they have some problem with the senor for tellstick, but tellstick did fix this in the software.
http://developer.telldus.com/ticket/235

[Irritanterik]

Can you put your homeseer log here?
Maybe it has something to do with the configured device value pairs. ([url]http://www.homeseer.com/support/homesee ... rs.htm[url])
It's worth trying setting a new value-pair with 'on' / 'off' values en use this in your events.