Replace IR remote using RaspberryPI or similar

Forum about hardware/software for the Philips Pronto TSU9600 and other remotes.

Moderator: hvxl

Post Reply
raymonvdm
Senior Member
Senior Member
Posts: 1153
Joined: Sun Dec 18, 2011 1:23 am

Replace IR remote using RaspberryPI or similar

Post by raymonvdm »

I want to replace my "Remote Control" remote with an RaspberryPI or similar but i`m not shure which way to go

Image


Can this be sufficient ? http://www.seeedstudio.com/depot/usb-in ... p-831.html

Direct links of pictures

http://files.raqxs.nl/domotica/fan_remote/foto%201.JPG
http://files.raqxs.nl/domotica/fan_remote/foto%202.JPG

Datasheet of the IC http://www.silan.com.cn/english/product ... 5104AY.pdf
Datasheet of the orange resistor? http://dalincom.ru/datasheet/CRB455E.pdf

Image
Image
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
Top
raymonvdm
Senior Member
Senior Member
Posts: 1153
Joined: Sun Dec 18, 2011 1:23 am

Re: Replace IR remote using RaspberryPI or similar

Post by raymonvdm »

I succeeded to learn some of the command`s on my Logitech Harmony 525 stop / fanspeed 1 / fanspeed 2 / fanspeed 3 are working however dimmer and on/off are not working.
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
Top
Post Reply

Return to “Philips Pronto (TSU9600), IRtrans and other remotes”