problem with "light on when motion" scene

[I-1]

Hi,

I have build the following scene:

"When between 17:00 and 09:00 motion is detected the lights go on and after 30 seconds the light goes off again."

I have build 3 scenes to make this work (see screenshots below).

My Problem:
When motion is detected the lamp goes on, and after 30 seconds the lamp goes off again.
But right after the lamp has gone off I make some movement to trigger the motion again and the lamp is not turning on...
After a while this is working again if I try this 2 min. later...
But this is not how it is supposed to work right?
Does anyone know how I fix this?

[raymonvdm]

In HomeSeer there is an option to prevent the event from triggering to often (cannot retrigger for x minutes) maybe Fibaro has the same options?

I`m not sure how the event works, but are you sending the on and off at once but with a sleep of 30 seconds? Maybe these are the 30 seconds at which the script is not starting because it is still running (sleeping 29 seconds before finished)

[Akatar]

does the hc2 see the motion? some pirs only report every x minutes

[blokl]

Did you see this?
http://forum.fibaro.com/index.php?/topi ... ing/page-2