To make a very long story short; in the wifi adapter tp 703n flash file has a bug for the usb connection
An 4 usb hub solves the problem
After this it is running smooth
Rgds
Huib
OpenTherm Gateway LAN/WIFI model
Moderator: hvxl
Re: OpenTherm Gateway LAN/WIFI model
Hi all,
New to this forum, not new to domotica.
Can anyone help me along....
I have the TPLink WR710n flashed with OpenWRT, the presolderd Opentherm Gateway USB model.
When i connect the OTG directly to the pc, it works and OTmonitor reads values.
The problem is getting the settings right for wifi connection inside the TPlink.
I am using Domotics running on a Syno and have the IPadres and port of the TPlink.
On the TPlink i have installed ser2net but do not see any ttyusb.
Any help on getting me further would be nice
New to this forum, not new to domotica.
Can anyone help me along....
I have the TPLink WR710n flashed with OpenWRT, the presolderd Opentherm Gateway USB model.
When i connect the OTG directly to the pc, it works and OTmonitor reads values.
The problem is getting the settings right for wifi connection inside the TPlink.
I am using Domotics running on a Syno and have the IPadres and port of the TPlink.
On the TPlink i have installed ser2net but do not see any ttyusb.
Any help on getting me further would be nice