Thin wallswitch

[DJF3]

Hi,

Because of cabling and a fibaro module there's not enough space for a normal wall switch..

Do you know if there are thin (ondiepe) wall switches?

DJ

[AshaiRey]

KaKu switches can be flat on the wall. But you probaly don't want to use KaKu so don't . Get everything out of the KaKu switch except the switches. Just wire the fibaro switch to the internal switches in the KaKu

[raymonvdm]

Or place the fibaro module inside the lamp or pattress box in the ceiling

[DJF3]

Or place the fibaro module inside the lamp or pattress box in the ceiling

There's no space either

So here's what I have, and (marked in green) what I would love to have..

wall switch

IMG_4503.jpg (148.89 KiB) Viewed 11534 times

[raymonvdm]

There are two types of patress boxes (55mm and 40mm) i think you have the 40mm

One solution is to use a duwi lookalike switch or use some sort of filler to create the needed space

[Akatar]

zelf zou ik dan voor een pulsschakelaar gaan omdat er een fibaro achterzit
misschien zijn deze ook wat ondieper?
http://www.elektrooke.nl/peha-pulsschak ... GwodPaIOyw

of een duwi wandzender, die kunnen plat op de muur