Home Automation Domotica Forum Europe, Bwired Forum

I upgraded my Toon with the updated_rooted.sh scripts. Half-way the upgrade my SSH connection went down.
The scripts died half way the rm -f commands. So I ended up with a half installed Toon.

Also an opkg update does not work anymore. Host feed.hae.orig is not found even when the tunnel is up.

Is there a way to restore the Toon with the original firmware and restart the updated_rooted.sh script again?

Greetz,
Karl

karll64 wrote:Host feed.hae.orig is not found even when the tunnel is up.

This host doesn't exist. Maybe a typo in your /etc/hosts file?
-> feed.hae.int

Nope. I think there is something seriously wrong.
The MAC address of my wlan is 00:00:00:00:00:00. The ethernet MAC is ok.
The original Toon logo circle with T is presented on the display and stays on the display.

I looked on the serial console and no error messages are displayed.

marcelr wrote:

karll64 wrote:Host feed.hae.orig is not found even when the tunnel is up.

This host doesn't exist. Maybe a typo in your /etc/hosts file?
-> feed.hae.int

feed.hae.int is the localhost (for toonstore). the update script replaces the original feed.hae.int to feed.hae.orig

karll64 wrote:Nope. I think there is something seriously wrong.
The MAC address of my wlan is 00:00:00:00:00:00. The ethernet MAC is ok.
The original Toon logo circle with T is presented on the display and stays on the display.

I looked on the serial console and no error messages are displayed.

First of all, this should not happen. The update script is only a wrapper on top of the script from eneco/quby which does the actual update. This update has reboot protection in it so it will restart a failed update if it detects a reboot.

But it happened to you so I'm curious how. Let me try to help you remotely. Send me a teamviewer session in PM. Or your mobile number in PM so we can whatsapp the teamviewer session.

Can you try to run the update script once more and force the latest version?
> update-rooted.sh -v 4.16.8

This will re-download all 4.16.8 files and install them just like a normal update.

Ok I'am bit further. The MAC address of the WiFi card is still all zero's.
And also the display with tiles is not displayed.
The display lookes like the on attached to this post. It stucks on this display and after a whilte the display becomes black.

Can't see anything Please try again.

marcelr wrote:Can't see anything Please try again.

I can see the attachment now, loading bar(4.16.8 style) is 60% full, 40% empty.
Looks like the GUI files are broken/missing.

I already sent you another post on which I offered my help using teamviewer. From tomorrow on I'm on vacation so your only chance is today

TheHogNL wrote:I already sent you another post on which I offered my help using teamviewer. From tomorrow on I'm on vacation so your only chance is today

I have sent you a e-mail with my contact details.
Gr
Karl