Home Automation Domotica Forum Europe, Bwired Forum

Using the appropriate led controller it is possible to adjust the brightness of the led without any flickering effect. Not all led controllers are capable for led dimming; proper dimming for led lighting (avoiding led colour shift) can only be done by pulse width modulation based controllers.

LT-SYSTEM-3600RC is a full colour multifunctional rgb led controller based on PWM technology and designed to control colour changing combinations of LED strip lighting with 4-pin 3-loop cables (common anode). It can be adjusted through manual buttons or matching remote control device. Also this unit can run as a standalone controller or linked with an rgb amplifier which can unlimitedly expand its capabilities.

http://www.hiline-lighting.com/pd-dimma ... roller.cfm

I thought it was a wireless Lan version!
But is wireless the remote with the antenna?
How is the remote operating on which frequency 433mhz?

This is actually a Radio frequency (RF) dimmable RGB led controller (Version 2+); operating frequency is 433Mhz. It is a constant voltage led controller and can operate from 5 to 24V DC (6A/CH).

We will soon have ready to ship version 3.00 of this controller (will be shown into our website and will replace V2+).

More details for the new version (PDF format) can be found at:
http://www.hiline-lighting.com/files/LT ... 0RC-V3.pdf

Note: Similar dimmable led controller (led dimmer) already available for single color led applications; for more info please check out the following link:
http://www.hiline-lighting.com/pd-wirel ... dimmer.cfm