Page 1 of 1
Can't add Oregon sensor
Posted: Sun Dec 20, 2009 7:18 pm
by Edwin
cant add the oregon thr 128 on channel 3
did a clear heard but still the:No devices found to add line
i have another on channel 2 no problems
and a thgr 122 on channel 1 no problems
what to do?
thanks greetings edwin
Re: cant add sensor
Posted: Sun Dec 20, 2009 7:57 pm
by b_weijenberg
The THR128 transmits sometimes a wrong signal after reset. The easiest way is to use RFreceiver then set the sensor to ch 3 and reset the sensor until it is received.
Re: cant add sensor
Posted: Sun Dec 20, 2009 8:51 pm
by Edwin
b_weijenberg wrote:The THR128 transmits sometimes a wrong signal after reset. The easiest way is to use RFreceiver then set the sensor to ch 3 and reset the sensor until it is received.
thanks bert i will try that.
Re: Can't add Oregon sensor
Posted: Mon Dec 19, 2011 3:33 pm
by Wim2008
I have several Huger BTHR918 sensors. All of them exept 1, I could read in with RFXcom till now.
The last one, I have reset him several times on several days, isn't recognize with the RFXcom.
How can I controll this last sensor ?
B.R. Wim
Re: Can't add Oregon sensor
Posted: Mon Dec 19, 2011 4:00 pm
by b_weijenberg
Is that sensor detected by the Oregon base station? In other words is the sensor OK?
Re: Can't add Oregon sensor
Posted: Mon Dec 19, 2011 4:37 pm
by Wim2008
I haven't a base station?
Can I see or controlled that on another way?
B.W. Wim