RFXtrx & linux

[WinuX]

I have a ubuntu desktop linux system
RFXtrx connected to the USB port.
When connected to the computer, dmesg say:

Code: Select all

[  277.165286] usbcore: registered new interface driver usbserial_generic
[  277.165324] usbserial: USB Serial Driver core
[  277.187733] USB Serial support registered for FTDI USB Serial Device
[  277.190247] ftdi_sio 2-1:1.0: FTDI USB Serial Device converter detected
[  277.191256] usb 2-1: Detected FT232RL
[  277.191293] usb 2-1: Number of endpoints 2
[  277.191307] usb 2-1: Endpoint 1 MaxPacketSize 64
[  277.191321] usb 2-1: Endpoint 2 MaxPacketSize 64
[  277.191331] usb 2-1: Setting MaxPacketSize 64
[  277.275704] usb 2-1: FTDI USB Serial Device converter now attached to ttyUSB0
[  277.277598] usbcore: registered new interface driver ftdi_sio
[  277.277634] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver

Started

Code: Select all

sudo mono rfxmngr.exe 

RFXmngr does see the ttyUSB0 port, could connect establish connecting to RFXtrx, can't execute commands.

Possible something silly stupid, but can find what's wrong.

[Quinten]

Have you set the baudrate correctly? Or it is permissions...

[WinuX]

Baudrate is the same as in the windows machine.
What permissions do you mean?

[Frosty]

Sounds like your RFX transceiver isn't booted right. Check the unit, if the red LED is solid (not blinking) , its in a boot state (check the quick manual that came with it). It's supposed to go from red->orange blink->no lights. Try another usb port or reconnect the cable.