Home Automation Domotica Forum Europe, Bwired Forum

Hi,

I'm having problems with my TYTN II smartphone, it connects fine using built-in WIFI, get an IP address, but it doesn't get a DNS server assigned.

DCHP server is Internet Systems Consortium DHCP Server V3.0.1. Wireless is in a separate VLAN with helper address configured.

Same DHCP setup works fine for an iPod touch.

-Willem.

what is the radio version of your tytn
I have good experience with version 1.58

Rom version 1.156.114.4 (09/01/07)
Radio version 1.27.12.11
Protocol version 22.45.88.07H

BTW, it is the T-Mobile 'version' of the TYTN II ....

That's one of the first Rom versions

Versions of my system
ROM 3.14.502.1
Radio 1.65.14.06
Protocol version 25.81.40.02H

Hi Willem,

What wireless access point/wireless router are you using? I encountered the same problem with my TYTN II in combination with an (old) Netgear ME102 access point. When I switched over to my wireless Siemens ADSL modem/router (which is also my DHCP server) for wireless access, it worked flawlessly (I used the ME102 because the Siemens modem/router doesn't reach all rooms in our house). The TYTN II did connect with the Netgear ME102, but I had no Internet connectivity. I guess the TYTN II is a little selective in its wireless access (counter)parts? Try a different wireless device to see if it solves your problem, as it may not be your DHCP server...

ROM version: 1.56.405.5
ROM date: 08/28/07
Radio version: 1.27.12.11
Protocol version: 22.45.88.07W

Lennart

Hi Lennart,

I have full trust in my Cisco AP it does connect, get's an ip address, but fails to get dns ... No problem whatsoever with other devices.

-Willem.

<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Chak</i>
<br />That's one of the first Rom versions
Versions of my system
ROM 3.14.502.1
Radio 1.65.14.06
Protocol version 25.81.40.02H
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">The T-Mobile site has no new firmware available, any other ways to get it updated ??

I have the same HTC TYTN II version as Lennart, Wifi works ok on Draytek Vigor 2950 router.

ROM version: 1.56.405.5
ROM date: 08/28/07
Radio version: 1.27.12.11
Protocol version: 22.45.88.07W

Did you search the TYTN II forum http://forum.xda-developers.com/forumdisplay.php?f=376

i dont have any issues, but i have my wireless access point forward dhcp request to my own dhcp server build. (so i can also send out tftp adresses and such for my cisco phone)if you have a working dhcp for it, you can perhaps forward it like i do. (if you have that option)

// Erik (binkey.nl)

Hi,

Well looking at the date it seems my ROM is a little younger 9/1 vs 8/28.

@snelvuur; I'm running my own DHCP server which provides all my devices with successfully with ip addresses, dns, pxe information etc etc.

on the next url are different versions available for download.
I'm using the vista version from april 13.

http://forum.xda-developers.com/forumdisplay.php?f=378

must be a bug in the version i have, it does a proper request, and it gets a proper response ......

BOOTP/DHCP, Request from 00:18:41:32:0b:ce, length: 305, hops:1, xid:0x23074c85, flags: [none]
Gateway IP: router.dk.eradus.com
Client Ethernet Address: 00:18:41:32:0b:ce
Vendor-rfc1048:
DHCP:REQUEST
RQ:Willem_HTC-1.dk.eradus.com
CID:[ether]00:18:41:32:0b:ce
HN:"Willem_HTC-1"
PR:SM+DG+NS+DN+WNS+WNT+WSC
VC:"Microsoft Windows CE^@"

BOOTP/DHCP, Reply, length: 300, hops:1, xid:0x23074c85, flags: [none]
Your IP: Willem_HTC-1.dk.eradus.com
Server IP: ha-10.dk.eradus.com
Gateway IP: router.dk.eradus.com
Client Ethernet Address: 00:18:41:32:0b:ce
Vendor-rfc1048:
DHCP:ACK
SID:ha-10.dk.eradus.com
LT:86400
SM:255.255.255.0
DG:router.dk.eradus.com
NS:ha-10.dk.eradus.com,ha-8.dk.eradus.com
DN:"dk.eradus.com"
WNS:ha-10.dk.eradus.com

<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Chak</i>
<br />on the next url are different versions available for download.
I'm using the vista version from april 13.

http://forum.xda-developers.com/forumdisplay.php?f=378
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">HI Chak,

Are you running this on an original TYTN II or e.g. MDA Vario III. I'm tempted to install the Vista version as well.

-Willem.

Yep,
I'm running the vista since few days.
It's running very stable and performance is good.

Before you can install
you need hardspl
http://wiki.xda-developers.com/index.ph ... .Upgrading

Who can do better .....