Can't add Oregon sensor

[Edwin]

cant add the oregon thr 128 on channel 3
did a clear heard but still the:No devices found to add line
i have another on channel 2 no problems
and a thgr 122 on channel 1 no problems

what to do?
thanks greetings edwin

[b_weijenberg]

The THR128 transmits sometimes a wrong signal after reset. The easiest way is to use RFreceiver then set the sensor to ch 3 and reset the sensor until it is received.

[Edwin]

The THR128 transmits sometimes a wrong signal after reset. The easiest way is to use RFreceiver then set the sensor to ch 3 and reset the sensor until it is received.

thanks bert i will try that.

[Wim2008]

I have several Huger BTHR918 sensors. All of them exept 1, I could read in with RFXcom till now.
The last one, I have reset him several times on several days, isn't recognize with the RFXcom.
How can I controll this last sensor ?

B.R. Wim

[b_weijenberg]

Is that sensor detected by the Oregon base station? In other words is the sensor OK?

[Wim2008]

I haven't a base station?
Can I see or controlled that on another way?

B.W. Wim